Single 15 Inch Ported Subwoofer Box Design
You Save 91% ($45.55)$4.44
The single 15-inch ported subwoofer box design provides you with the blueprints to build your own vented subwoofer box. This single 15-in sub-box design has a volume of 3.25 ft3 and a tuning frequency of 32 Hz.
A PDF of the blueprint (box design) will be emailed in less than 30 minutes after you order. If you don't receive it, please check your spam folder or contact us at email@example.com.
*Note: All box designs are non-returnable. There is no refund on box designs.
Dimension: (34 x 20.25 x 13.5) Inches
Build this box for skar svr-15 d2 I used 3/4 MDF wood glued all seems before braid nailing it together then drilled and countersunk about 300 premium grade 1-3/4 wood screws they are similar to decking screw they just hold tighter than I silicones all the inside seeams put so good quality black paint inside just to seal the mdf and finally I filled the screw wholes sanded her smooth then hurculined the entire outside if the box with 3 coats all together best durable box for the Pacific Northwest I've ever made. Thank xt sounds
Very satisfied with box design
Single 15 Inch PORTED Subwoofer Box Design